This add support for two upcoming enhancements on the GitHub side of self-hosted runners, ephemeral runners, and `workflow_jow` events. You can't use these yet.
**These features are not yet generally available to all GitHub users**. Please take this pull request as a preparation to make it available to actions-runner-controller users as soon as possible after GitHub released the necessary features on their end.
**Ephemeral runners**:
The former, ephemeral runners, is basically the reliable alternative to `--once`, which we've been using when you enabled `ephemeral: true` (default in actions-runner-controller).
`--once` has been suffering from a race issue #466. `--ephemeral` fixes that.
To enable ephemeral runners with `actions/runner`, you give `--ephemeral` to `config.sh`. This updated version of `actions-runner-controller` does it for you, by using `--ephemeral` instead of `--once` when you set `RUNNER_FEATURE_FLAG_EPHEMERAL=true`.
Please read the section `Ephemeral Runners` in the updated version of our README for more information.
Note that ephemeral runners is not released on GitHub yet. And `RUNNER_FEATURE_FLAG_EPHEMERAL=true` won't work at all until the feature gets released on GitHub. Stay tuned for an announcement from GitHub!
**`workflow_job` events**:
`workflow_job` is the additional webhook event that corresponds to each GitHub Actions workflow job run. It provides `actions-runner-controller` a solid foundation to improve our webhook-based autoscale.
Formerly, we've been exploiting webhook events like `check_run` for autoscaling. However, as none of our supported events has included `labels`, you had to configure an HRA to only match relevant `check_run` events. It wasn't trivial.
In contrast, a `workflow_job` event payload contains `labels` of runners requested. `actions-runner-controller` is able to automatically decide which HRA to scale by filtering the corresponding RunnerDeployment by `labels` included in the webhook payload. So all you need to use webhook-based autoscale will be to enable `workflow_job` on GitHub and expose actions-runner-controller's webhook server to the internet.
Note that the current implementation of `workflow_job` support works in two ways, increment, and decrement. An increment happens when the webhook server receives` workflow_job` of `queued` status. A decrement happens when it receives `workflow_job` of `completed` status. The latter is used to make scaling-down faster so that you waste money less than before. You still don't suffer from flapping, as a scale-down is still subject to `scaleDownDelaySecondsAfterScaleOut `.
Please read the section `Example 3: Scale on each `workflow_job` event` in the updated version of our README for more information on its usage.
Previously the E2E test suite covered only RunnerSet. This refactors the existing E2E test code to extract the common test structure into a `env` struct and its methods, and use it to write two very similar tests, one for RunnerSet and another for RunnerDeployment.
This enhances the E2E test suite introduced in #658 to also include the following steps:
- Install GitHub Actions workflow
- Trigger a workflow run via a git commit
- Verify the workflow run result
In the workflow, we use `kubectl create cm --from-literal` to create a configmap that contains an unique test ID. In the last step we obtain the configmap from within the E2E test and check the test ID to match the expected one.
To install a GitHub Actions workflow, we clone a GitHub repository denoted by the TEST_REPO envvar, progmatically generate a few files with some Go code, run `git-add`, `git-commit`, and then `git-push` to actually push the files to the repository. A single commit containing an updated workflow definition and an updated file seems to run a workflow derived to the definition introduced in the commit, which was a bit surpirising and useful behaviour.
At this point, the E2E test fully covers all the steps for a GitHub token based installation. We need to add scenarios for more deployment options, like GitHub App, RunnerDeployment, HRA, and so on. But each of them would worth another pull request.
This is the initial version of our E2E test suite which is currently a subset of the acceptance test suite reimplemented in Go.
To run it, pass `-run ^TestE2E$` to `go test`, without `-short`, like `go test -timeout 600s -run ^TestE2E$ github.com/actions-runner-controller/actions-runner-controller/test/e2e -v`.
`make test` is modified to pass `-short` to `go test` by default to skip E2E tests.
The biggest benefit of rewriting the acceptance test in Go turned out to be the fact that you can easily rerun each step- a go-test "subtest"- individually from your IDE, for faster turnaround. Both VS Code and IntelliJ IDEA/GoLand are known to work.
In the near future, we will add more steps to the suite, like actually git-comminting some Actions workflow and pushing some commit to trigger a workflow run, and verify the workflow and job run results, and finally run it on our `test` workflow to fully automated E2E testing. But that s another story.
* feat: RunnerSet backed by StatefulSet
Unlike a runner deployment, a runner set can manage a set of stateful runners by combining a statefulset and an admission webhook that mutates statefulset-managed pods with required envvars and registration tokens.
Resolves#613
Ref #612
* Upgrade controller-runtime to 0.9.0
* Bump Go to 1.16.x following controller-runtime 0.9.0
* Upgrade kubebuilder to 2.3.2 for updated etcd and apiserver following local setup
* Fix startup failure due to missing LeaderElectionID
* Fix the issue that any pods become unable to start once actions-runner-controller got failed after the mutating webhook has been registered
* Allow force-updating statefulset
* Fix runner container missing work and certs-client volume mounts and DOCKER_HOST and DOCKER_TLS_VERIFY envvars when dockerdWithinRunner=false
* Fix runnerset-controller not applying statefulset.spec.template.spec changes when there were no changes in runnerset spec
* Enable running acceptance tests against arbitrary kind cluster
* RunnerSet supports non-ephemeral runners only today
* fix: docker-build from root Makefile on intel mac
* fix: arch check fixes for mac and ARM
* ci: aligning test data format and patching checks
* fix: removing namespace in test data
* chore: adding more ignores
* chore: removing leading space in shebang
* Re-add metrics to org hra testdata
* Bump cert-manager to v1.1.1 and fix deploy.sh
Co-authored-by: toast-gear <15716903+toast-gear@users.noreply.github.com>
Co-authored-by: Callum James Tait <callum.tait@photobox.com>
- You can now use `make acceptance/run` to run only a specific acceptance test case
- Add note about Ubuntu 20.04 users / snap-provided docker
- Add instruction to run Ginkgo tests
- Extract acceptance/load from acceptance/kind
- Make `acceptance/pull` not depend on `docker-build`, so that you can do `make docker-build acceptance/load` for faster image reload
This is an attempt to support scaling from/to zero.
The basic idea is that we create a one-off "registration-only" runner pod on RunnerReplicaSet being scaled to zero, so that there is one "offline" runner, which enables GitHub Actions to queue jobs instead of discarding those.
GitHub Actions seems to immediately throw away the new job when there are no runners at all. Generally, having runners of any status, `busy`, `idle`, or `offline` would prevent GitHub actions from failing jobs. But retaining `busy` or `idle` runners means that we need to keep runner pods running, which conflicts with our desired to scale to/from zero, hence we retain `offline` runners.
In this change, I enhanced the runnerreplicaset controller to create a registration-only runner on very beginning of its reconciliation logic, only when a runnerreplicaset is scaled to zero. The runner controller creates the registration-only runner pod, waits for it to become "offline", and then removes the runner pod. The runner on GitHub stays `offline`, until the runner resource on K8s is deleted. As we remove the registration-only runner pod as soon as it registers, this doesn't block cluster-autoscaler.
Related to #447
* Fix acceptance helm test not using newly built controller image
* Locally build runner image instead of pulling it
* Revert runner controller image pull policy to always
and add a line to the test deployment to use IfNotPresent
* Change runner repository from summerwind/action-runner to the owner of actions-runner-controller.
Also fix some Makefile formatting.
* Undo renaming acceptance/pull to docker-pull
* Some env var cleanup
Rename USERNAME to DOCKER_USER(is still used for github too tho)
Add RUNNER_NAME var(defaults to $DOCKER_USER/actions-runner)
Add TEST_REPO(defaults to $DOCKER_USER/actions-runner-controller)
* Cache docker images locally
Cache dind, runner, and kube-rbac-proxy docker image on the host and copy onto the kind node instead of downloading it to the node directly.
* Also cache certmanager docker images
One of the pod recreation conditions has been modified to use hash of runner spec, so that the controller does not keep restarting pods mutated by admission webhooks. This naturally allows us, for example, to use IRSA for EKS that requires its admission webhook to mutate the runner pod to have additional, IRSA-related volumes, volume mounts and env.
Resolves#200
It turned out previous versions of runner images were unable to run actions that require `AGENT_TOOLSDIRECTORY` or `libyaml` to exist in the runner environment. One of notable examples of such actions is [`ruby/setup-ruby`](https://github.com/ruby/setup-ruby).
This change adds the support for those actions, by setting up AGENT_TOOLSDIRECTORY and installing libyaml-dev within runner images.
Adding multi-arch image support for `arm64` and `amd64`. This uses dockers new `buildx` feature, to enable further architectures more work will be required to update the `runner/Dockerfile` file to pull architecture-specific releases.
The Makefile targets really should only be used for local testing and not for release, additional work to appropriately tag the release images may need to be added but for now, I've not added that logic.
Fixes: #86
Signed-off-by: Michael Fornaro <20387402+xUnholy@users.noreply.github.com>
